Summary Discussion and Q&A Forum New OneClickVirt Panel

linying23333 · December 21, 2025, 2:37pm

Continuing the discussion from NodeLoc Container / VM Service Launch Announcement:

Last updated: 2026.01.10 20:28:44

First, a disclaimer: everything below is just my own understanding and opinions, not official advice or stance

Are these currently the known issues with the panel?

Why can’t VMiss VPSs created before 1:00 PM on December 21, 2025, be accessed via SSH with my own tools? | Why are previously opened/applied-for VMiss VPSs missing? | Why does applying for one VPS occupy two VPS slots?

A1: Initially, due to a configuration error by the admin:

~~Creating one container occupied two user container quotas~~ (fixed by the panel developer)
This caused the VMiss host to not correctly create VPSs (just a guess), so naturally, there was no NATv4 port mapping and you couldn’t SSH into your VMiss VPS.
And because the error on the VMiss host wasn’t addressed promptly, even users with opened VMiss VPSs were restricted. This led to a backlog of multiple open VMiss VPS tasks. (admin has reinstalled the system and fixed it)

Ultimately, to fix these issues, the admin forcefully removed all VMiss VPSs (including opened, applied-but-not-yet-opened, etc.), cleared the data, reconfigured, and brought the service back online (essentially, the VMiss VPSs got rolled back).

Q2: I chose 1mbps, 2mbps, 3mbps, 4mbps, 5mbps, 10mbps, 20mbps, 30mbps, 50mbps, 100mbps, 200mbps for the VPS bandwidth, but why is the actual speed only 3Mbps (about 375KB/s)? | Why did my quota decrease?

A2: The admin said this limitation is to prevent overuse that could make sponsors refuse to continue sponsoring, ensuring sustainable development.

P.S. The admin also said that users who can still use over-quota resources because of this adjustment won’t be affected for now.
Affected users will have to delete and recreate their VPSs.

Update 20260110: New machines are capped at 30Mbps

Q3: Why doesn’t deleting a VPS free up its slot?

A3: Is it a panel (OneClickVirt) issue? The original intention of the dev was to make things easier for individuals or small groups with only a few VPSs, so some features aren’t fully implemented yet (the dev’s been slow to update), and a lot has to be done by hand at this stage. (Or maybe the admin didn’t configure the panel correctly…) (Fixed, user testing see link)

Q4: Why are all my port mappings gone after I reinstall the system from the panel?

A4: Not sure if it’s an admin config error or a panel bug. In any case, don’t click “Reinstall System” from the panel for now, or you might lose your port mapping and won’t be able to connect.

Q5: What if I accidentally clicked “Pause” in the panel and now can’t use my VPS normally?

A5: Panel issue. Handle it the same way as A6

Q6: Why does my forum account upgrade not change my VPS panel level or quota?

A6: The original panel didn’t have NL login; the admin added it separately. So, user creation, level setting/changing all need to be managed manually. But since there was no auto-sync, after upgrading, your level wouldn’t change automatically. Please contact the admin via Telegram: Launch @NodeLocChatBot to request manual processing. (Fixed, panel dev added login-triggered sync)

Q7: I meet the basic requirements for Gold Member, but on the application page for share.nodeLoc.com, VMiss is clearly unlimited, yet shows ‘No Data’ and I can’t create a container at all

A7: Refer to the official panel instructions. Besides personal quota limits, it could be that the panel considers there isn’t enough server quota available (in plain terms, “out of stock”).

…To be continued

Some other rules/issues found

Traffic stats are abnormal — can’t properly track usage
The machines have outbound IPv6, but it’s not assigned to the VPS. You can only use it to access pure IPv6 services
To be discovered…?

TL;DR: Don’t mess with the panel!!! There are bugs everywhere right now. If something breaks, you’ll have to ask admin to fix it. If you want to change systems, use a dd script that supports LXC containers.

Finally, rational discussion please — both the panel (OneClickVirt) and the admin are in test operation. Just report issues normally. Don’t be too aggressive or complain too much — thanks

Collection of user questions?

Summary

关于12-21号领取的skywolf小鸡速率问题 - #10，来自 local
关于12-21号领取的skywolf小鸡速率问题 - #14，来自 local

James · December 21, 2025, 2:41pm

Thank you for the summary, it was very thoughtful

GeorgeXie · December 21, 2025, 2:43pm

Thank you for the summary

jy02739244 · December 21, 2025, 2:45pm

Just leave it for now, wait until the speed limit is relaxed a bit.

creminjess · December 21, 2025, 2:49pm

Free panel available for initial testing phase. It’s normal to encounter issues. Please be patient, as bug fixes will take time.

James · December 21, 2025, 2:50pm

Additionally, it feels like this post is an AI summary.

linying23333 · December 21, 2025, 2:51pm

Nope, I typed it by hand. I think I’m more like a bot

另外目录怎么用啊. 我记得你好像说如果用markdown格式写的会自动列目录的呀. 玩不明白hhh
I even dug up the documentation at 关于论坛现行排版代码的示范

azhaoyihao · December 21, 2025, 2:55pm

Thank you for the senior’s summarized answers!

James · December 21, 2025, 2:56pm

Ha ha, it shows you have some AI flavor.

The summary is pretty good. OneClickVirt currently has many issues, and I actually don’t know OneClickVirt very well either. This time, I had to force it onto the stage, and at the same time, I took the opportunity to improve OneClickVirt based on feedback from the forum. In fact, this system is very powerful.

Actually, the Q1 issue was because I originally deployed OneClickVirt with Docker and configured VMISS. Later, due to the need for frequent updates, I redeployed it from source code without using the original database, but did not reinstall the VMISS machine. This led to the created machines having network issues. To avoid future problems, I directly reinstalled the VMISS machine. Additionally, not releasing quotas when deleting chickens should be a bug, and doubling the configuration is also a bug. Currently, there are quite a few bugs. If you have any issues, please create an Issue. The improvement of open-source projects is based on user feedback, growing together with everyone.

Issues · oneclickvirt/oneclickvirt

James · December 21, 2025, 2:57pm

Adding a table of contents requires adding a label

Arvin_Leung · December 21, 2025, 2:58pm

Summarized well, hope you will continue to follow up.

linying23333 · December 21, 2025, 2:59pm

Of course, I support this. But after checking the issues, I feel that directly posting links might confuse some forum members who won’t know how to provide logs when reporting to the author. This would make the author’s job difficult…

linying23333 · December 21, 2025, 3:02pm

Can just enable by throwing an html tag identifier? I clicked on it, and since you used html tags, I thought it needed to be fully wrapped hhh

James · December 21, 2025, 3:03pm

Hmm, right, just for identification purposes, no need to wrap it.

kof97zip · December 21, 2025, 3:36pm

Did starting this container mean that the VPS has stopped?

trial · December 21, 2025, 5:15pm

look thanks

linying23333 · December 21, 2025, 5:48pm

What are you saying? Can mini and National Day machines be used at the same time?

This platform is this platform’s, and mini and National Day machines are from another platform. They don’t interconnect, and you can always hold them repeatedly as long as you can afford to renew with nl.

kof97zip · December 21, 2025, 6:30pm

freex that panel seems inaccessible

jzhfg · December 21, 2025, 7:10pm

Cautious MJJ is the cutest part_24

cs9u · December 21, 2025, 10:58pm

It feels like the smell of “you are all insects.”

Topic		Replies	Views
[UlziX]关于香港免费区容量调整与排队轮换机制的公告 UlziX vps	52	664	August 17, 2026
NL近期将关闭 VirtFusion 并转移到 PVE 杂谈	72	526	February 9, 2025
📢 NodeLoc 容器 / 虚拟机服务上线公告公告 FreeNodeloc	283	3579	January 6, 2026
Easyvm 5555 Plan 生日款 $55/2yr 简测评测	17	515	May 15, 2024
给新注册账号来领Mini小鸡的朋友提个醒 AskNodeLoc FreeNodeloc	65	1097	September 20, 2025